MA0414X-7A Well Pump Review: Pumps 30 GPM for 4-Inch or Bigger Wells

Where the MA0414X-7A Fits

MA0414X-7A Deep Well Submersible Pump moves water with 1 hp for you if your well uses a 4-inch casing and a 2-wire setup.

A 1-1/4 in discharge matters when your older pump starts limiting household flow, because the outlet size shapes the plumbing match you must make before ordering.

MA0414X-7A gives you 1 hp, 33 GPM, and a 207 ft maximum head in one deep well submersible pump. That combination suits deeper wells with higher demand, especially when you need a 4-inch well fit and a 2-wire motor.

We screened 107 Well Pumps and this is one of 15 chosen for a full review. Full reviews go to the most-rated products that pass screening, at most 2 per brand. This one has 1,451 buyer ratings, the 1st most of the 107 screened. If you are replacing an older well pump, compare your casing diameter and discharge size against the 4-inch pump body and 1-1/4 in outlet before you order.

If you are considering a different brand, see our full review of the SWS75.

The Short Answer on the MA0414X-7A

Best for: you need a 1 hp submersible well pump for a 4-inch or larger well and want 2-wire wiring without a separate control box.

MA0414X-7A is the right pick at around $145 if you want 33 GPM, 207 ft of maximum head, and a 1-1/4 in discharge in one 4-inch pump.

• Pro: The 1 hp motor gives you the power level many household well systems need for longer runs and higher demand.
• Pro: Its 33 GPM flow rate supports several fixtures at once and helps reduce short-cycling in a pressure-tank setup.
• Pro: The built-in control box and 2-wire motor simplify the parts list for a setup that does not use a separate control box.
• Con: The 207 ft head limits how much lift the pump can handle, so very deep wells need a different model.
• Con: The 1-1/4 in discharge rules out buyers whose plumbing is sized for a different outlet diameter.

Don’t buy this if: your well casing is smaller than 4 inches or your discharge plumbing is not built for 1-1/4 in.

Price assessment: $145 is fair for a 1 hp, 33 GPM stainless-steel submersible pump with built-in thermal protection and a built-in check valve.

For a higher-powered alternative, look at our spec breakdown of the RL12G15-3W2V.

The Specifications That Matter for this Well Pump

Maximum flow rate is the row that separates MA0414X-7A most clearly. It measures how much water the pump can move in a given time under stated conditions.

Before You Buy: Well Pump Checklist

The first thing to check is your well size and discharge match. MA0414X-7A is a 4-inch submersible pump with a 1-1/4 in outlet, so a mismatch means you may be forced into a return or plumbing changes.

• ☐ Confirm your casing is 4 inches or larger — the pump is listed for a 4″ or bigger well, and a smaller casing can stop the order from fitting at all.
• ☐ Check your discharge plumbing for 1-1/4 in compatibility — the 1-1/4 in outlet can leave you with incompatible piping if your system is sized differently.
• ☐ Measure your required lift against the stated 207 ft maximum head — if your well needs more lift, the pump may run without delivering usable pressure at the tap.
• ☐ Match the wiring plan to a 2-wire setup — this model has a built-in control box, so a different wiring scheme can mean extra parts or a re-buy.
• ☐ Budget for a 220V / 230V AC supply — the pump is specified for that power, and the wrong supply can leave you with a unit you cannot use as ordered.
• ☐ Confirm your system can use a 1 hp pump — if your setup is sized for less, you may end up with a pump that is more capacity than your system needs.

If your well is smaller than 4 inches, your plumbing is not 1-1/4 in, or your lift demand is higher than 207 ft, do not buy this pump.

Performance: What the Specs Deliver

What 33 GPM flow delivers for a larger home

MA0414X-7A’s 33 GPM flow rate gives you enough output for a larger home that runs several fixtures at once. That matters when your older pump struggled to keep showers, laundry, and a kitchen tap active at the same time.

Its 1 hp motor also matters here, because horsepower is the work rating that supports sustained pumping demand. A 1 hp submersible pump is the right scale for a system that needs steady household delivery without jumping to the 1/2 HP floor or the 3/4 HP step-up many older setups use. If your demand is closer to a cabin with one faucet and a short run, this much flow is more than you need.

Why a 4-inch well casing matters for fit

MA0414X-7A is a 4-inch submersible pump, so it belongs in the standard well casing size many buyers must match before ordering. That fit matters more than headline flow if your well bore is already fixed, because a pump that does not match the casing diameter is the wrong size for the job.

Its 1-1/4 in discharge size also shapes the rest of the system, since the outlet has to align with the plumbing you already have in place. For a homeowner replacing an older 4-inch unit, this is the point to measure first: the casing diameter and the discharge line size, not the horsepower alone. The 10-foot cord is short enough to keep the setup centered on the pump location, but it does not change the fit requirement.

How built-in thermal protection helps long pump runs

Built-in thermal protection gives MA0414X-7A a clear advantage for long pump runs, because it adds a shutdown safeguard for overheating conditions. That is useful in a well that sees extended draw periods, such as a house filling storage after a long dry stretch.

The 2-wire motor and built-in control box also keep the wiring side simpler than a 3-wire setup that needs a separate control box. If you are replacing an older submersible system and want fewer external parts to account for, this configuration is the cleaner match. The thermal protection does not change the 207 ft maximum head, so you still need to confirm that your well depth and water level fit that lift figure before you order.

Common Buyer Jobs Checked Against the MA0414X-7A’s Specs

The MA0414X-7A against 5 jobs buyers ask about, worked out from its listed maximum head and horsepower and a typical need for each job.

How the MA0414X-7A Compares to Other Well Pumps

MA0414X-7A gives you 1 hp, 33 GPM, and a 207 ft maximum head for less than the $145.99 Deep Well Pump and the $149.99 competitors. It is the cheapest of the six compared here, and it also states a 1-1/4 in discharge size.

• Against the Deep Well Pump, MA0414X-7A pairs 1 hp with 33 GPM, while that rival states 1/2 HP and 18 GPM.
• Against BOMGIE Shallow Jet Well Pump, the Hallmark model uses a 2-wire motor with a built-in control box, so it avoids a separate control box for that setup.
• Against Portable Stainless Steel Lawn Pump, MA0414X-7A states a 4-inch pump diameter, which matters if your well casing is sized for that fit.
• Against Goplus Shallow Well Pump, this model is the only one here that states thermal overload protection and a built-in check valve together.
• Against PUMPMAN Shallow Jet Well Pump, MA0414X-7A carries the higher buyer rating at 4.4 from 1,451 ratings, while PUMPMAN is rated 4.4 from 67 ratings.

If you want the simplest 2-wire setup, MA0414X-7A is the cleaner pick because it states a built-in control box and no external control box requirement. If you want a different setup, choose BOMGIE Shallow Jet Well Pump instead; it is the competitor here with a 1.5 hp rating.

You might also prefer to see how the CWS50 performs in various setups.

From Delivery to First Use with This Well Pump

What MA0414X-7A needs before it can run

MA0414X-7A needs a 220V / 230 Volts AC supply and a 4-inch-or-larger well opening before it can do any work.

1. Confirm the well opening measures 4 inches or more, since the pump diameter is 4″.
2. Match the power source to 220V / 230 Volts at 60Hz before you bring the pump into service.
3. Set up the 1-1/4 in discharge connection so the outlet side matches the pump’s discharge size.
4. Use the built-in control box, since this is a 2-wire pump and no external control box is required.
5. Check whether your pressure tank and pressure switch are sized and set for a 33 GPM pump, because short cycling starts when those parts do not match the flow.

Warranty and support: what to verify after delivery

Warranty cover differs by seller and country.

• Confirm the return window before it closes, because the 27.3-pound pump is not a small item to ship back.
• Confirm whether the seller covers the built-in thermal protection and built-in check valve, since those parts are part of the pump itself.
• Confirm the terms for the 2-wire motor and built-in control box, because MA0414X-7A does not use a separate external control box.
• Confirm support for a 4-inch submersible pump with a 1 hp motor, since replacement decisions depend on those exact specs.

On delivery day, open the box and verify the 4″ pump diameter, 1-1/4 in discharge size, and 220V / 230 Volts rating while a return is still possible.

The MA0414X-7A: Remaining Questions

Discharge size and fit

MA0414X-7A uses a 1-1/4 in discharge. That size matters because it sets the outlet diameter your existing pipe and fittings must match, and a mismatch usually means adapters or a return. The pump is also listed for 4-inch or bigger wells, so measure both the discharge line and the casing before you order.

Is the 1-1/4 in discharge going to match my existing pipe and fittings?

No, the 1-1/4 in discharge only matches existing pipe and fittings if your outlet side is already that size. MA0414X-7A gives you a 1-1/4 in outlet, so a different pipe size means extra fittings at the connection point. Measure the discharge line you already have before you buy.

Is this a good value for a 1 hp deep well pump, or am I giving up reliability to save money?

The $145 price sits on a 1 hp deep well submersible pump with stainless steel construction, thermal overload protection, and a built-in check valve. MA0414X-7A also carries a 4.4 average from 1,451 buyer ratings, which gives you buyer feedback alongside the spec set. That makes the value question hinge on whether you want those listed features at this price, not on a price-only shortcut.

What does the 1 hp rating mean for this pump?

MA0414X-7A is a 1 hp pump, so the motor power is in the range many household systems use for longer runs and more lift. The same rating also works with a 2-wire submersible setup, which keeps the wiring simpler than a separate control-box arrangement. Its 207 ft maximum head is the number that matters if your well is deep or the water level drops far below the intake.

Will the 33 GPM flow rate help a house with several fixtures?

Yes, the 33 GPM flow rate is the figure that supports a larger home using several fixtures at once. That flow rating also helps a pressure tank avoid short-cycling under normal household demand. Flow rate does not tell you pressure by itself, so the head number still matters for deeper wells.

Is the MA0414X-7A Right for You?

The MA0414X-7A suits 5 kinds of buyer and is the wrong choice for 5 jobs, listed below with the reason for each.

Where to Buy This Well Pump

Well pumps are sold by the retailers below – we do not track which of them has the MA0414X-7A in stock, so check availability and the current price with the retailer before making a trip.

• SupplyHouse.com (online only) — specialist staff and breadth of range
• Amazon (online only) — breadth of range and easy comparison shopping
• Home Depot (online and physical stores) — breadth of range and in-store returns
• Lowe’s (online and physical stores) — breadth of range and in-store returns
• Ace Hardware (online and physical stores) — local pickup and specialist staff
• Northern Tool + Equipment (online and physical stores) — breadth of range and specialist staff
• Grainger (online and physical stores) — business or trade accounts

Final Verdict on the MA0414X-7A

You’re replacing an older 4-inch submersible setup and need 1 hp, 33 GPM, and a 1-1/4 in discharge in the same pump. Hallmark Industries MA0414X-7A is around $145.

The 207 ft maximum head is the key number here. It gives you enough lift for the easier end of deeper-well and low-water jobs, while the 2-wire motor with a built-in control box keeps the wiring side simpler than a separate-box setup.

Skip it if: your well needs a 3-wire control-box layout, or if your casing or discharge size is not 4 inches and 1-1/4 in.