Can the CJE075-1 well pump work with a single-pipe shallow well or a two-pipe deep well setup?

We picked it for this answer because its spec breakdown gives both configurations, plus the venturis and ejector kit that make the setup choice concrete.

You can find our full review of the Acquaer CJE075-1 for a detailed look at its technical specifications.

How pipe layout affects CJE075-1 lift pressure and cycling

For a well pump buyer, this question matters because the pipe layout changes whether the pump can move water without excessive head pressure. Head pressure is the lift resistance the system must overcome, and the CJE075-1 lists 157 feet of maximum lifting height, 24 gallons per minute, and a 3/4 HP motor. A pressure tank stores water so the pump does not cycle constantly, and a pressure switch starts and stops it at set pressure. The listing says the switch starts at 20 PSI and shuts off at 40 PSI.

For a side-by-side look, see how the CJE075-1 compares to other similar models.

What to Check Before Buying the CJE075-1

• Measure your well depth and confirm whether your setup is single pipe or two pipe before ordering.
• Check the intake and discharge sizes against your existing plumbing; a wrong diameter can block fit regardless of pipe layout.
• Confirm whether your system already uses a pressure tank and a pressure switch set for 20 PSI to 40 PSI operation.
• Look for a check valve in your current setup, since backflow control matters in a two-pipe well.
• Verify that your available power matches the dual-voltage motor, which is factory set for 230V.
• Check whether your planned use is irrigation or lawn sprinkler service, since the listing names those uses directly.

Where the CJE075-1 Fits Among Well Pump Options

The CJE075-1 sits in the middle of the shallow-well and deep-well crossover group. A homeowner with a shallow well and a simple single-pipe layout can use its 0-25 ft range, while a deeper two-pipe setup can use the 26-90 ft range and the included ejector kit. A buyer who needs a higher-flow system for long runs, larger demand, or more lift should compare other pump types, because this model’s 24 GPM and 157-foot lift describe a practical but not unlimited setup. The cast iron body and 35-pound weight also place it in the conventional utility-pump class rather than a lightweight portable one.

If your setup is limited by depth, see our list of the best well pump for a shallow well.

Choose CJE075-1 if your well layout matches either the shallow single-pipe range or the deeper two-pipe range, and you want a 3/4 HP pump with automatic thermal overload protection. If your setup needs a different casing size, a different pressure-control arrangement, or more lift than your property requires, look elsewhere.

Remote setups have specific needs, so consider the best well pump for an off-grid cabin for your property.

Reviewed by the Predicament Measures editorial team.