LANCHEZ JGP11007WUINOX Well Pump Review: Pumps Water to 147 ft for Shallow Wells and Irrigation

Where the JGP11007WUINOX Fits

LANCHEZ JGP11007WUINOX pumps water with 1.6 HP for a Submersible Well Pump buyer who needs more motor power than a 1 HP setup.

If your setup calls for a 1″ NPT inlet port and a 1″ NPT outlet port, the connection sizes can decide the purchase before flow does.

LANCHEZ JGP11007WUINOX pairs those ports with 1.6 HP, which makes it a fit for buyers matching a submersible pump to existing 1-inch plumbing.

We screened 107 Well Pumps and this is one of 15 chosen for a full review. Full reviews go to the most-rated products that pass screening, at most 2 per brand. This one has 827 buyer ratings, the 4th most of the 107 screened. This review is for you if you need a Submersible Well Pump and want the connection details stated plainly.

The Short Answer on the JGP11007WUINOX

Best for: You need a 1.6 HP well pump for a shallow-well or irrigation setup with 1-inch NPT ports.

Choose the JGP11007WUINOX if you want a 1.6 HP pump with 1500 GPH flow and a 147 ft maximum head, and it costs around $109.99.

• Pro: Its 147 ft maximum head suits shallow-well and water-transfer jobs better than deeper-well demands.
• Pro: The 1 in NPT inlet and outlet keep the plumbing size straightforward for matching systems.
• Con: The 147 ft head rules it out for deeper wells that need 150 to 300 ft of lift.

Don’t buy this if: your well setup needs 150 ft or more of head for deeper lifting.

Price assessment: Around $109.99 is low for a 1.6 HP pump with stainless steel construction and automatic thermal overload protection.

If your water source is near the surface, find the top-rated well pump for a shallow well.

The Specifications That Matter for This Well Pump

Maximum head most separates JGP11007WUINOX here. Head measures the greatest vertical lift the pump can overcome while moving water.

Before You Buy: Well Pump Checklist

The first thing to check is whether your well, pond, rain barrel, or transfer setup needs a 1 in outlet and 1 in NPT ports. If those sizes do not match, you will need different fittings or a different pump.

• ☐ Confirm your water source and use case — shallow wells, ponds, lakes, rain barrels, tanks, sprinkler systems, general irrigation, and water transfer are all stated uses, so a mismatch leaves you with a pump that fits the plumbing but not the job.
• ☐ Measure the outlet and inlet sizes — 1″ NPT outlet port and 1″ NPT inlet port, because the wrong port size means incompatible plumbing or a return.
• ☐ Check the lift you need — 147 ft maximum head, since a deeper well or a higher lift need can leave you with pressure at the pump but not at the tap.
• ☐ Confirm the flow you need — 1,500 GPH flow rate, because a larger demand can leave you short on water delivery and force a replacement.
• ☐ Budget for the connection parts you still may need — thread seal tape is included, but the listing does not state any adapter set, so a missing match can delay hookup or add extra purchases.
• ☐ Check your power setup — 16 ft power cord, because a longer run to the outlet can leave you needing a different placement or an extension arrangement you did not plan for.

Do not buy this pump if your system needs a deeper lift than 147 ft or a different port size than 1 in.

Performance: What the Specs Deliver

Lift and Pressure

JGP11007WUINOX gives you 147 ft of maximum head, so it suits a shallow well or a run where the water does not have to travel far upward. That number is the key one for a deep-ish well question, because head measures vertical lift, not flow. A 62.25 PSI maximum pressure also gives you a clear ceiling for the pressure side of the job.

For a house or tank feed, that head figure is the limit to watch before you commit. A pump with 147 ft of head can support a shallow-well setup, but the same number leaves less room for long lift runs than a higher-head model. Think of head like the height of a ladder: once the climb gets taller, the same pump has less margin left for pressure at the tap.

How 1,500 GPH flow and 1 in NPT connections help

JGP11007WUINOX moves water at 1,500 GPH, and that is the figure that matters if you want usable output for irrigation or transfer. The 1 in NPT inlet and 1 in NPT outlet also keep the connection size clear, which matters before you order fittings for a pump that may feed a sprinkler system, a tank, or a transfer line.

That flow rate is enough to support general irrigation and water transfer, but it is not the same thing as pressure at the nozzle. If your setup needs steady spray over several heads, you should match the pump’s 1 in ports and 1,500 GPH output to the rest of the line size and demand. The 1.6 HP motor gives the pump the power to move that volume, while the discharge size keeps the plumbing choice fixed at 1 in.

Why thermal overload protection and auto-shutoff matter

JGP11007WUINOX includes automatic thermal overload protection, so the motor has a built-in safeguard against heat-related shutdowns. It also has auto-shutoff, which matters if you want a pump that can stop itself instead of running on through a dry or blocked condition. For a buyer planning a shallow-well or tank setup, those two features reduce the number of outside controls you need to add.

The 16 ft power cord and manual priming requirement shape the install side of the decision. You need enough reach from the power source, and you need clean water ready before first use. The stainless steel construction and pressure gauge are useful here too: one supports corrosion resistance in wet locations, and the other gives you a visible pressure reading without guessing.

Common Buyer Jobs Checked Against the JGP11007WUINOX’s Specs

The JGP11007WUINOX against the jobs buyers ask about, worked out from its listed horsepower and maximum head and a typical need for each job.

Homeowners interested in green energy can learn how to run a well pump on solar power.

How the JGP11007WUINOX Compares to Other Well Pumps

LANCHEZ JGP11007WUINOX has the strongest motor in this comparison at 1.6 HP, and it is tied on price at around $109.99 with two rivals while carrying a 1 in discharge and 147 ft maximum head.

• Against the VEVOR Deep Well Submersible Pump, the price is the same at around $109.99, so the decision turns to output details instead.
• JENENSERIES lists a 98 ft maximum head, while this pump states 147 ft. That gap matters for lift.
• Tuhorse uses a 1 inch outlet, the same size this pump states. Neither model wins on discharge size.
• ZYIY lists 13.2 GPM max flow rate, while this pump states 1,500 GPH. If you are comparing output volume, that is the cleaner separation.
• Happybuy is cheaper at around $102, but it also states 1/2 HP. This pump sits at 1.6 HP, so it favors buyers who want more motor power.

If you want the higher-head option, Tuhorse is the better pick here because it states 280 feet. The extra lift matters more than the price gap for deeper service.

You can compare specifications in our full review of the MA0414X-7A.

For a different configuration, see the Acquaer CJE075-1 performance breakdown.

From Delivery to First Use with This Well Pump

What JGP11007WUINOX needs before it can move water

For JGP11007WUINOX, clean water is the first requirement, because the listing says “for clean water only.”

1. Confirm a 1 in NPT inlet port and a 1 in NPT outlet port where the pump will connect.
2. Prepare a clean-water source, since the pump is specified for clean water only.
3. Position the system for a 16 ft power cord, because that is the stated cord length.
4. Set up the pressure gauge and auto-shutoff function for the intended water transfer or irrigation task.

Warranty and support checks for this well pump

Warranty cover differs by seller and country.

• Confirm the return window before it closes, because this pump uses a 1.6 HP motor and a 147 ft maximum head.
• Confirm whether the seller covers the 1 in NPT ports, because mismatched fittings can leave you with a return instead of a working setup.
• Confirm support for the automatic thermal overload protection, because that protection is part of the motor system and is not user-serviceable.
• Confirm support for the auto-shutoff function, because that control affects how the pump stops during use.

On arrival, verify the port size and cord length first, while a return is still possible.

The JGP11007WUINOX: Remaining Questions

Is JGP11007WUINOX worth around $109.99 for a 1.6 HP pump?

Yes, JGP11007WUINOX gives you 1.6 HP, a 147 ft maximum head, and a 1 in discharge size at around $109.99. That combination is unusual at this price, but the listing also states 16 ft of power cord, stainless steel construction, and automatic thermal overload protection, so the low price is not the only data point here.

The trade-off is not hidden performance data; it is the application fit. The pump is rated for clean water only, and its 147 ft head is the figure that matters if you need lift more than raw flow.

Does JGP11007WUINOX fit a 2-wire submersible setup without a separate control box?

That puts it in the range the job calls for, while the product data still leaves the wiring style unstated.

You still need to confirm your own system’s discharge size, and this pump states 1 in NPT ports. A mismatch there matters more than the horsepower number if the plumbing cannot connect cleanly.

Can JGP11007WUINOX pull water from a deeper well without losing usable pressure at the tap?

No, JGP11007WUINOX is not the right match for that deeper-well job because it states 147 ft maximum head. Head is the lift figure that matters here, and this listing gives a single number for it.

That makes the pump a better fit for shallower lift needs than for wells that demand 150 to 300 ft of lift. The flow rate is listed at 1,500 GPH, but flow does not replace head when the lift requirement is the problem.

What does the 62.25 PSI maximum pressure mean on JGP11007WUINOX?

62.25 PSI maximum pressure is the highest pressure figure the listing gives for JGP11007WUINOX. That matters if your setup depends on pressure at the tap, but it does not say anything about well depth by itself.

The pump also lists 1,500 GPH and 147 ft maximum head, so pressure is only one part of the picture. If your system needs both lift and pressure, you have to weigh those figures together.

What do I need to measure before ordering JGP11007WUINOX?

Measure your connection size and your lift requirement before ordering JGP11007WUINOX. This pump states 1 in NPT inlet and outlet ports, plus 147 ft maximum head.

Is the JGP11007WUINOX Right for You?

Who the JGP11007WUINOX suits and the jobs it is the wrong choice for, listed below with the reason for each.

Where to Buy This Well Pump

Well pumps are sold by the retailers below – we do not track which of them has the JGP11007WUINOX in stock, so check availability and the current price with the retailer before making a trip.

• Ace Hardware (online and physical stores) — local pickup and specialist staff
• Northern Tool + Equipment (online and physical stores) — breadth of range and specialist staff
• Grainger (online and physical stores) — business or trade accounts
• SupplyHouse.com (online only) — specialist staff and breadth of range
• Amazon (online only) — breadth of range and easy comparison shopping
• Home Depot (online and physical stores) — breadth of range and in-store returns
• Lowe’s (online and physical stores) — breadth of range and in-store returns

Final Verdict on the JGP11007WUINOX

You are sizing a shallow-well or general irrigation setup, and you need a 1 in discharge with enough lift for a shallow source. LANCHEZ’s JGP11007WUINOX is around $109.99.

The 1.6 HP motor and 147 ft maximum head are the numbers that matter most here. That lift figure is the reason this pump suits shallow wells, ponds, lakes, rain barrels, tanks, and water transfer more naturally than deeper-well work.

Skip it if: your well needs deeper lift than 147 ft, or you need a pump for a 3-wire submersible setup with a control box.